Description
Brand: EIMSOAH
Characteristics:
- Material: Made of 316L stainless steel bezel and anti-fog glass, it has excellent anti-fog and water resistance properties and can be used for a long time even in cold marine environments.
- Mode: Press the keyboard mode to switch between SH, DP, KL, and UN functions. Used to turn the monitor on and off. Short press to set the desired value and make the digit rise or fall smoothly.
- Application: Boat depth gauge, easy to install, good durability, shockproof, flexible and easy to use, suitable for yachts, small and medium sized boats, fishing boats and other types of marine transportation.
- Practical: The working voltage of the digital depth gauge for boats is 9-32V, up to 16V, low power consumption, long service life, high accuracy, short start-up time, the highest depth display of 100m, you can know the water depth immediately.
- Function: This device only works with a 12V system to indicate the set depth. Normally, the buzzer will beep once when properly connected and then turn on the power.
Binding: Tool
Model number: EIMSOAHudo7psgf0v
Article number: EIMSOAHudo7psgf0v
Details: Specification:
Item type: Depth sounder
Material: 316L stainless steel, anti-fog glass, ABS
Mounting hole diameter: Approx. Φ52mm/2in
Depth display range: 0-100m/0-328FT
Backlight color: White
Operating voltage: DC 12V
Instantaneous voltage: DC 9-32V, up to 16V
Operating current: 60 mA
Operating temperature: -30 °C - + 75 °C
Storage temperature: -40 °C - + 85 °C
Dial water resistance: IP67
Rear cover waterproof rating: IP5
Application:
Step 1: Open a 52 mm diameter circular hole in your center control or other pre-installed position
Step 2: Insert the instrument into the open round hole
Step 3: Align the screw hole of the bracket with the screw on the back of the instrument, then tighten it with the screw and clamp the plate with the bracket and the clock frame
Step 4: Plug the power harness directly into the rear connector of the instrument, and then connect the corresponding sensor and wiring harness according to the distribution instructions to connect the power supply.
Wiring method: The red wiring is connected to the positive electrode. The orange wire is connected to the backlight and the blue wire is connected to the negative electrode of the power supply.
Packing list:
1 x depth sounder
1 x encoder (with 10 m cable)
2 x screw
1 x power cable
1 x manual
Package dimensions: 7.9 x 6.3 x 2.4 inches
